Hissing speakers on the computer what to do

Music and sound - perhaps the most important component in the use of a computer. However, the sound quality may “limp” and deteriorate over time. For example, many users often complain that the sound from the speakers has become somehow sizzling. What it can mean and how to deal with it, read our material.

Hissing speakers

Unfortunately, along with the total malfunction of the speakers, there is such a problem as crackling and other noise. It appears for completely different reasons that it is impossible to determine right away. Each fault is different from the other - the level and frequency of noise, the conditions of its occurrence, the sound itself (it can resemble whistling, trembling, clicking). Of course, if you properly navigate in such a situation, it is quite possible to fix the problem by your own efforts. This article contains the most popular causes of speaker malfunctions and tips for solving such problems.

It is logical to assume that with noise in only one column, you should not pay attention to the state of the cable and the settings in the computer. Obviously, the fault lies in the column itself. The most common cause of extraneous sounds is the unstable position of the connector, which affects the operation of the audio system as a whole.

The elimination of this fault is briefly described below. Remember that a breakdown can be in more complex parts that you cannot figure out on your own. If in doubt, carry the speakers to the repair service; there is no better solution.

Often some noise appears due to the fact that some electrical device works near the speakers, the principle of action of which is based on the reception or transmission of radio waves. This is most noticeable when there is a telephone nearby, where messages are received or incoming calls arrive. Try to find a slightly different place for your phone and other equipment, otherwise you will hardly get rid of the annoying sound.

Hissing at minimum or maximum volume

Often, users complain about extraneous noise in the speakers when it reaches the maximum or minimum possible volume. At the same time at the average level, the sound can remain absolutely clear. In such a situation, changing the settings in the computer or the TV itself (where the speakers are connected) can help. It is necessary in the sound settings to find the property of the speakers, and there the tab “levels”.

Here you need to remove the extra checkboxes, it will help to "unload" the speakers a bit and make the sound cleaner. You can also find the “Improvements” section and find the “Loudness” tab there, enable it if it hasn’t been done before. Also check the presence and relevance of drivers, if necessary, make an update. In most cases, the sound becomes much better. If this does not happen, then the fault lies in the technical condition of the speakers, connectors or wires.

Important! Please note that the problem may also be grounded.

That is, if the speakers and the appliance itself are connected to different networks with different grounding, then extraneous sounds are quite acceptable. Try to connect to the same network if available.

When the volume reaches more than half of the possible, cheap types of sound equipment begin to "fade", that is, to produce extraneous noises. Unfortunately, there is nothing to fix - the problem lies in the quality of the product, in the assembly and details. Expensive headphones and speakers also fade at maximum volume, however, not so noticeable and not so disgusting.

What to do?

The first thing to do is to check the integrity of the cable over its entire length and the reliability of its connection to the power grid. In most cases, the cause of noise will be exactly that. Try to find the place of cable damage and fix everything - you will need to strip the insulation, carefully twist the wire and insulate it back. True, with poor-quality performance, such a structure is unlikely to live long. Remember, you need to work with the wire very carefully, it is also necessary to operate it carefully. Many people are irresponsible about this, but the cable is quite easy to damage by mechanical action.

The next step is to check the status of the audio jacks. They are also quite easily damaged and quickly fail. Try to insert the plug into the "socket" and move it there, twist it in different directions. If the speakers emit any extraneous sounds, the fault lies precisely in the connectors. To fix the problem yourself, you need to try to eliminate the gaps that had formed, as well as to eliminate mobility.

In this case, special glue can help, which should be poured over the sides of the connector into the gaps formed. Try to work carefully, so as not to make it worse! You can also disassemble the column if it has an uncomplicated device and you are confident in your abilities. In the disassembled state, it is easier to cope with the fixation of the connector.

Important! Many users use unnecessarily long wires, extension cords, and so on for speakers.

It can also cause the appearance of various whistles and noises, pay attention to this and try to use the native wire, or rather short of the purchased ones. Often the cable is in a suspended state - hanging from a table or shelf. For example, when the window is open and the draft is formed, the cable will hang in different directions. This, of course, can provoke interference in the operation of any electric device, especially in audio equipment. It should also ensure that the wires are not intertwined with each other, not tangled and do not form any nodes.

If it is impossible to eliminate the malfunction on your own, or there are certain doubts about your own strength and knowledge, then you should not risk it - you need to include the speakers in the service for repairing equipment. Specialists with the help of high-quality equipment will do the work qualitatively, thereby saving you a lot of effort, time and nerves. We hope that the tips collected in this material will help you cope with the problem.

Watch the video: How to Fix Sound StutteringCrackling Audio on Windows PC - Permanent Solution 2019 (March 2024).

Leave Your Comment