Headphone crackle on a Windows 10 computer

Over time, any equipment breaks down or its quality begins to yield to the characteristics of new models. Because of this, its performance decreases, and some functions become unavailable for use. Headphones have their own term and operating rules, therefore, playback problems may occur periodically.

In the modern world, it is impossible to imagine a person who would not use this device. We listen to their favorite music, books, articles, watch films with their help. This is an incomplete list of usability options. Headphones have become an integral and important part of everyday life, so their breakdown causes negative emotions.

One of the common problems is wheezing when listening to audio. This interferes with the normal reproduction and perception of music, and also adversely affects health. In this article, we’ll talk about troubleshooting methods.

One of the possible causes of cod can be incorrect connection of drivers, their absence or breakdown. If you have experience configuring them, you can try to fix the problem yourself. For convenience, it is better to use the instructions below:

1. By simultaneously pressing the Win and R keys (in some versions only Win is used), go to the "Run" window.
2. Type devmgmt.msc in the search bar.
3. Confirm the request with the mouse or with the Enter key, log in to the system.
4. Among the proposed list, find the item with sound devices and go into it.
5. Then right-click on your driver and update it. If there is no effect, you can remove and install it again.

IMPORTANT! If noise arises as a result of mechanical damage, you should not repair it yourself, as there is a risk of damage to the equipment and damage to health.

When the problem is not in the drivers, and reinstalling them did not help get rid of wheezing, you should use the sound settings. Setting up will not be difficult, for this you need to perform the following steps:

1. Enter the control panel through the "Start" button. It is located in the lower left corner of the monitor, you can also use the keyboard button with the image of the corresponding icon.
2. Go to the "Hardware and Sound" section.
3. Open "Sound" and find the device you need that is connected to the computer.
4. Right-click on it and go to the headset properties.
5. Adjust the settings to get the desired result.

When carrying out these manipulations, keep the equipment turned on to determine the effectiveness of the adjustment and the change in sound quality.

It is possible that the source of the problem is in the BIOS. Malfunctions are divided into two types: mechanical and software. In the first case, you should contact the master to repair the chips or replace them. Do not try to repair the equipment yourself.

In the case of software failures, you can try to solve the problem yourself. To do this, log in and find the parameters C1 and EIST that interest you. Set their value to Enabled. Then close everything by pressing F10 and restart the computer.

ATTENTION! Not all devices have these settings.

To solve a malfunction in the sound, you can use the interpreter. With it, there is a chance to eliminate unpleasant noise in the headphones. The principle of the technique is to write special commands for the system in order to improve the operation of the equipment:

1. Open the Run window by simultaneously pressing the Win + R keys, as described above.
2. Type cmd in the input line and press ok or Enter.
3. After that, a window should appear on the screen with an inscription on a black background. Using the keyboard, type "bcdedit / set {default} disabledynamictick yes" and activate it by pressing the Enter button.
4. Next, type another command, "bcdedit / set {default} useplatformclock true".

Now you just have to restart your computer and evaluate the quality of the headset.

Specific cracking or noise may occur due to improper sound settings and sound wave transmission systems. This can be easily fixed by editing the corresponding parameters in the system menu:

1. On the taskbar, click on the speaker image and open the "Playback devices" item.
2. In the dialog box that opens, select the default device and go to its properties.
3. After that, a new dialog box should appear.
4. At the top, select the "Advanced" tab from the list. In this paragraph, connect a 16-bit and 44100 Hz connection, which is universal for all types of systems.
5. Among all the items, select the line with additional devices and uncheck it.
6. Then click on the "Advanced Features" tab and turn off all additional effects by checking the corresponding line.
7. Click on the memory of the current settings and restart the computer. After that, everything should work and reproduce high-quality sound.

If none of the above helps you, you will most likely have to buy new equipment.