How to choose a computer chair

The main feature of the computer chair is the installation of a mechanism for adjusting the tilt and seat height. Due to the considerable weight, the chair most often has wheels for moving around the office or apartment.

How to choose a computer chair

The main criterion is the time spent behind the monitor, as well as the ability to replace the user:

1. Up to 2 hours. This mode involves using the computer after hours: viewing mail, news, chatting on social networks. For this, a chair made of cheap materials, equipped with a small number of adjustments, is quite suitable. The cost of this chair is the lowest.
2. 3-5 hours a day. This mode is comparable to working at a computer. The chair must have an adjustment of the height and tilt of the seat, the installation of armrests. The cost of these chairs is in the middle price category.
3. More than 5 hours daily. This means that the user is attached to the computer chair, as to the workplace. Saving in this case does not make sense. You can take a closer look at chairs equipped with a design of synchronous change in the position of the chair, taking into account the occupied posture. The mechanism is adjusted to the user's body weight. These chairs are the most expensive.

Seat height

The chair must have a not very hard seat. A product with a soft seat will lead to stoop and various pathologies of the pelvic organs. On a hard seat, you have to constantly change the position of the body, this improves blood circulation in the pelvic area. But spending a long time on a hard chair is quite difficult.

Attention! The height of the seat must be set taking into account the height of the lower leg. This height is required so that the feet are on the floor. Moreover, the knees were located at right angles.

What should be the back

For a comfortable location, the back must be anatomically shaped. If it is flat, then you can use an orthopedic pillow. Features of the choice:

1. It is best to choose a low back (± 50 cm), and emphasize only with the help of the lower part of the spine.
2. If you need to sit for a long time and require additional support in the shoulder region, you can take a closer look at the chair with a high back ± 70 cm.
3. If you need to relax the neck area during prolonged sitting, get a chair with a headrest.

Design

The design of the computer chair must have a five-beam support, as well as adjustment mechanisms that can be reached without rising from the seat.

Attention! A frame-shaped design with a roller under the lower back is required. The lower part of the seat must be round in order not to pinch the blood arteries under the knees.

Sheathing

Any material that is used for upholstering chairs has its own pros and cons:

1. Leatherette and eco-leather. Leather substitute is more brittle. During the manufacture of eco-leather do not use any plasticizers. It is based on cotton fabric, which during operation does not emit toxic substances, being absolutely safe. The main advantage is ease of care.
2. Genuine leather is more pleasant to the touch and has a longer service life, but the cost of this material is quite expensive.
3. Fabric is the most comfortable material, regardless of the temperature in the room. The fabric is breathable, but it will require careful care.

Practical and convenient additions

Choosing a chair, you can additionally pick up various amenities:

1. Synchromechanism. At the same time, the chair synchronously responds to all movements of the owner if he wants to lean sideways, backward or forward. Synchronization makes it possible to move simultaneously with the back.
2. Separate removable headrests are more of a decorative element. The situation is quite different with high back chairs, which you can lie down to the full height.
3. Sometimes the backs have an angle of inclination less than 90 degrees. This is not a factory marriage. This design moves forward simultaneously with the body, reducing the load on the spine.

Best computer chairs

The most popular computer chairs are considered products of Italian and German assembly. Also today, there is an influx of Chinese products that are not of high quality:

1. German chairs are characterized by comfort and safety. On the wheels of these seats are brake devices, which, if necessary, block rotation. Products have a thick layer of filler, which provides comfort while sitting.
2. Italian chairs are not inferior in quality to German ones. At the same time, they are much superior in design solutions.

So that time at the computer at home is not overshadowed by discomfort, create all conditions for work. The most important thing is to choose the right computer chair in which you can stay for a long time without feeling tired.