Why the cooler does not cool the water

Incorrect operation of the cooler brings inconvenience. What to do in such a situation? You can simply turn to specialists for help. But what to do if there is neither time nor money to contact the service? You can try to solve this trouble yourself. If the device does not cope with cooling, this can be caused by various malfunctions. Most often this is improper transportation, installation or inappropriate operating conditions.

Before contacting the wizard for help, you can trytheir efforts sort out with a problem.This solution will allow you to find a gentle way out.

Why the cooler does not cool the water

Did you notice that the equipment worked correctly, and over time it does not cool the water?The reason isthis the situation can be quite simpleeliminate her not be difficult.In some situations, without contacting specialists, it will not be possible to solve the malfunction.

REFERENCE. The equipment is capable of cooling only 3-4 glasses per hour, no more. The average temperature of chilled water can be 5-15 degrees, depending on the type of system.

Reason 1 - insufficient water cooling

This malfunction can occur for the following reasons:

  1. Does one cooler work for a large number of people? Most likely, he simply does not have time to cope with the tasks assigned to him. Depending on the type of cooling used in the device, give it the necessary amount of time to perform the cooling function. On average, 15 minutes will be enough.
  2. Otherthe reason this malfunctionsmay become incorrect adjustment of the water temperature controller. Most likely, it is installed at an insufficient level. To correct this situation, you should change the current settings.
  3. Is the device too close to the wall? In this case, probably notsufficient ventilation. For To resolve this problem, check whether there is a small gap between the body and the wall, it should be at least 10 cm.
  4. Overheatelements devices that are responsible forcooling water. The solution is very banal - unplug the cord from the outlet for half an hour.

Reason 2 - total lack of cooling

If the equipment is sent at all with the function of cooling the water, in this case these may be the following reasons:

  1. Equipment connected to the network?There may be no voltage on the network or there may be a problem with the outlet.
  2. Check if enabledtoggle switch, toawesome responsible foractivity the functions cooling.You can clarify the correct position of the toggle switch in the instructions.
  3. In electronic systems cannot work fan orelement Peltier. In this situation, it will be necessary to replace the failed parts.
  4. A compressor-based device. Quite it is likely that the compressor is not working.It can be repaired or replaced.

REFERENCE. A serious reason is the leak of freon. The reason is the occurrence of microcracks as a result of careless handling of the radiator grill. In this case, repairs are only possible at the service center.

In principle, an inexperienced master can cope with each of the above problems, if desired, if necessary.

Do-it-yourself repairs or specialist assistance?

Some causes of cooler malfunctions, which entail a malfunction of the cooling system, can be solved by one’s own efforts. But in any case, if you do not have experience in carrying out such work, it would be better to turn to specialists. This will guarantee a quality and prompt repair.

Do not postpone the repair of this equipment, repair it by your own efforts, or contact a qualified craftsman for help.

Watch the video: Why doesn't the water cooler cool water (March 2024).

Leave Your Comment