DIY brick oven plaster

Of course, every user of a popular heating device wants it to fit into the overall interior of the room. To do this, it is possible to make its lining, and with the help of various materials. The assortment will come exclusively from personal preferences and the abilities of the owners. Decorating stoves with ceramic tiles with your own hands in a private house requires certain knowledge, in the same way, as well as plastering. For inspiration, you can see the photo. However, it is worth considering some nuances. About them and the whole process will be discussed in this article.

The choice of material for facing the furnace

In order to make the progress of work expedient, it is advisable to understand what hardware you will interact with. Moreover, you should pay attention to certain points when the topic relates to the selection of products. For example, when choosing a ceramic tile, you need to consider the following:

• The most important thing is environmental safety. It is imperative that there is a special certificate.
• Appropriate size and shape. If you adhere to the recommendations, it is best to purchase a small tile. This is due to the fact that with small parameters, less delamination is guaranteed. As for the second aspect, simple products should be chosen so as not to exert maximum effort. But if you want a drawing, then the way of laying will be much more complicated.
• Specifications. These include both strength, resistance to stressful situations, and the level of moisture absorption with a coefficient of thermal expansion. In addition, it is important that the properties of the products include refractoriness and reliability.
• In addition to the required indicators, there are indirect, but no less important. For example, the correspondence between the interior and the shade of the material.

In addition, the following components should be purchased:

• Plaster.
• The solution is primer in order to process the walls.
• Specially designed tile adhesive (heat resistant).
• Mix for grouting. It will be needed when rubbing the seams.

ATTENTION! Before acquiring tiles, it is advisable to choose taking into account plus / minutes 5-10 stock. Since no one is protected from defective products and work errors.

Design development

It is very important to pay attention to this issue first. The answer will depend on which interior you choose. He considers the image of Russian cuisine quite popular. In this case, a rustic style is used, where you can notice a slightly rough surface finish. But the description does not end there. Everything is influenced solely by the imagination of the master. Therefore, there can be a wide variety of options for arranging the premises and completely dissimilar to the accusations that would seem familiar to society.

With independent construction, the brick type of laying is also in demand. But with him, as a rule, no additional cladding is used, since he himself is considered the main element of decoration. Despite this, finishing will still need to be done so that the material is used for many more years. As for other design options, it is the cladding of a structure with tiles or stones. But it is worth remembering that the final result will always be affected by your abilities and how difficult you have chosen to achieve the goal.

Stucco coating for stone stove

Plastering a brick oven with do-it-yourselfers is considered the simplest and easiest way to transform the appearance of a structure.

ATTENTION! Before starting the work process, it is necessary to maintain a certain period of one month in order for the entire structure to sit down. After this period has passed, you can safely proceed to further action.

They are particularly consistent in preparation:

• Eliminate all possible contamination and dust.
• Create a uniform surface by priming.
• Deepen all seams.
• Using a fine-grained mesh to tighten the device.
• After that, you can safely start heating the structure, and moisten its walls a little by applying water.

It is important to remember that the plaster itself is applied in several layers. Due to this, one smooth layer should be obtained. But between each time there should be a gap of four hours. A new application is determined after the previous one has completely dried. In addition, the first layer should be formed from a sufficiently liquid solution. This is necessary in order to align all possible angles and create the smoothest possible surface near the structure. The result - the strength of the unit due to the finish.

Tiling: profitable and easy

One alternative may be to use a material such as ceramic tile. If we talk about the composition and its manufacture, then it is worth noting the presence of colored clay. Most often, the front part is decorated with decorative painting. If you want to save money, you can pay attention to the terracotta product. For fans of a wide range of drawings, this option is considered the most acceptable, in addition, it is budget. You can choose an image that imitates natural stone or brick. If you are serious about the reliability of the structure, it is advisable to purchase one of the types of ceramics - clinker. Its properties are explained by the fact that the composition includes the highest quality grades of clay. Therefore, even sharp jumps in temperature are not able to break through the surface. And to give maximum durability, you can use a special composition. In addition to the described advantages, we can say about the simplicity of the process. Before you begin, you just need to plaster and reinforce the entire surface.

Stone work

In modern time, this particular type of cladding is gaining popularity more and more. When choosing a building material, you can pay attention to what is provided for the use of both artificial stone and natural. But the first and second have not only a pleasant appearance, but also high performance in fire resistance. With a long period of operation, when the appearance of the material will not be as fresh as it was originally, you can easily update it by painting in a new shade. Now that we’ve figured out some of the nuances, we can move on to the steps to be taken:

• The first step is to prime the entire available surface.
• Next, you need to make laying from the bottom of the structure. It is important to use the building level at this point, so as to not be mistaken with height.

REFERENCE! A special solution is also used in the work. It usually consists of sand, cement and various additives.

• Some add small particles of drywall. It is needed to embroider the seam.
• Then they cut the stone with a grinder and a disk. It should be set to low speed. This principle should be followed to avoid possible splinters.