DIY table for a 3D printer

Relatively recently, a new invention has appeared in the field of printing, which allows creating volumetric figures of various complexity and configuration. This significant discovery made a huge contribution to the development of all spheres of human activity. The printing of volumetric parts from polymeric materials solved the issue of manufacturing complex structural elements. Further development will allow the design and printing of organs of the human body.

However, this process is quite complicated, so it is necessary to properly ensure and control each stage. A special work table is used to model and print parts. If you want to improve its performance, you can independently assemble this element with your own hands. We will talk about this in the article.

IMPORTANT: Usually there is a need to increase the power and temperature of heating the surface.

Before starting work, you need to correctly calculate the dimensions of the future table and the amount of material. To do this, there is a special online calculator that allows you to accurately determine the length of the heating element. To do this, you need to enter the parameters: thickness, power and voltage. It is recommended to use the values ​​of 0.8 mm, 350 W and 55 V. In this case, you will get the optimal length of about 3.93 m. You can change various parameters to select the ideal ratio of all indicators.

Once you have decided on the size of the future table, you can begin the manufacturing process. To do this, you need the following set of tools and materials: wire of the required length, textolite, glass 2-4 mm (the thicker the better when heated), a cover made of wood or cork, a grinder and a small grinder.

1. Pull the wire around the entire perimeter, bending it in a spiral with a distance between coils of 0.5 - 1 cm.
2. Connect the wires in the circuit to the power source.
3. Then cover the structure with glass.
4. Under the bottom, it is better to put a tree or cork mat to prevent heating of surrounding objects.
5. Try turning on the blank. If desired and necessary, you can adjust the supplied power to change the temperature.

IMPORTANT: After several attempts, you will be able to select materials yourself and set the necessary parameters for work. Do not be afraid to experiment, but follow safety precautions.