Parquet board cycling

Parquet board, used as a floor covering, dramatically transforms the interior of the room. With prolonged use, its surface loses its attractive appearance. Roughnesses in the form of chips and cracks form on the coating, and the varnish itself begins to wear out. The replacement process has a rather high price, which will lead to unplanned financial costs.

You can update the old parquet board and restore the brightness using looping.

Parquet board structure

Parquet board has a multi-layer internal structure. Several layers significantly increase the wear-resistant qualities of the material, as well as improve its aesthetic appearance and attractiveness. Many manufacturers choose a three-layer option in the manufacture. In the market you can also find products consisting of four layers.

Reference: four-layer material has a higher price.

• In the manufacture top layer use natural wood materials. The appearance and color palette of this layer depends on the tree used.. It can be a beech, a maple, a nut. Less commonly used are merbau or wenge, which contribute to the creation of a deep dark shade with a unique ornament. To add shine and extend service life, the material is varnished.
• The middle row is made of fiberboard. Some manufacturers prefer to use chipboard or coniferous wood. The middle layer consists of several rows that overlap perpendicular to each other. This is necessary to increase the resistance of the coating to changes in temperature and humidity.
• Bottom layer is made spruce or pine wood. Some firms supplement the range with a thin sheet of plywood.

Cycle Steps

Looping helps to renew the top layer of the floorboard with minimal effort and financial costs. In most cases, the material is subject to a single update. In some cases, a similar procedure can be performed twice.

The process of cycling a parquet board takes place in several stages.

• First of all, from the old board topcoat removed. The main dirt accumulates on it, the surface is subject to regular damage, and the varnish is erased in places.
• After thorough removal, specialists go to grinding. This procedure allows you to completely smooth the surface, remove all chips and cracks.
• The final step is to cover the floorboard with several layers of varnish. It protects the material from mechanical stress and damage, returns the floor to its bright and attractive appearance.

Note: The big advantage of this procedure is the ability to update a wooden surface that has lost its aesthetics.

Completing of the work

Professional service workers upgrade using special machines and suitable tools. When handling, it is possible to loop piece or modular material.

reference! The advantage of a professional procedure is the minimum amount of dust that occurs in the process.

Self-cycling is also possible. This will require careful preparation of tools and additional protection.

• As a tool for removing the top layer is suitable Bulgarian. An important aspect is the correct speed control. Low rates contribute to a large removal of varnish.

Important! High speed requires special focus and attention. Since unsuccessful movement can lead to even greater damage to the floorboard.

• When preparing floors, thoroughly wash with clean water. This will help reduce dust.
• Removal Procedure Recommended start from the center of the room and move towards the walls. Coarse sanding removes old varnish. The second stage using a surface grinder completely levels the surface.
• After processing, the board is covered with putty. It is necessary to eliminate cracks or remaining chips. Excess building material is removed by re-sanding.
• When the excess amount of sanding is eliminated, the surface must be cleaned of accumulated debris. A construction vacuum cleaner is suitable for this. At the end of the treatment, varnish is applied, which is applied in several layers.

Cost determination

When contacting the service, the total cost of the upgrade is one of the most important.

• An important nuance is the condition of the floorboard. The minimum number of chips or cracks will significantly reduce costs.
• Besides, the price depends on the area of ​​the room itselfin which repair procedures will be carried out.
• Specialists also take into account the material of which the top layer is made. More expensive wood species require the use of certain means and more accurate actions.

Subtleties of caring for a parquet board after hitching

• At the end of the looping procedure the floor should be treated with a protective solution. is he contributes to the creation of a protective film.
• When buying funds for washing, it is necessary to choose components designed for cleaning on varnished surfaces.
• When carrying out wet cleaning, it is recommended to use a soft sponge or cotton rags.. Excess moisture significantly reduces the lifetime.
• A great advantage will be the use of antistatic or anti-slip agents.

Parquet board is one of the most popular materials among flooring. Over time, the material loses its aesthetics, damage forms on the surface. The looping procedure will help return the coating to its former attractiveness and extend its life.