The phone does not see bluetooth headphones

Wireless headphones greatly facilitate the use of the phone. During a conversation or listening to music, the hands of a person remain free, and he can do other things. However, problems with bluetooth devices, compared to conventional ones, can be much more. Read further about what first steps should be taken if the phone does not accept bluetooth headphones.

The phone does not see bluetooth headphones - what to do?

Many have come across a situation where their favorite phone stubbornly refuses to find a wireless gadget. In this situation, worry and frustration is not exactly necessary. In most cases, the problem can be solved on its own. You can also contact the experts and make a diagnosis of the device. What is the fault?

There are a huge number of reasons why the phone does not recognize the headset. A snag can occur both in the phone and in the wireless device. Therefore, to find it is not easy. However, at the initial stage it is important to understand in which particular device the problem should be looked for. Basically, all the breakdowns are related to the connected equipment, since the mobile equipment has practically no settings.

When buying a headset, the first thing you need to connect it to the device. OftenWhen buying an accessory in a store, the manager checks it for work, synchronizing it with his gadget. The buyer, seeing the serviceability of the device, pays the check and collects the goods. In the future, the headset refuses to work. If the headphones do not work, you can do the following check:

1. Headphones can be configured to another bluetooth device and check their synchronization. If the connection is present, then the reason for the snag should be sought in the smartphone.
2. Connect to the mobile phone another headset. The unavailability of communication between them indicates a failure or more serious malfunctions in the phone.

In the operation of wireless headphones involved a large number of elements. This is a Bluetooth module, a monitor of the wireless screen, an amplifier, a battery and many others. When the source that causes the problem is found, it should proceed to a more detailed analysis, find out the cause and, if possible, eliminate it.

Problem with the phone

You should adjust the phone and check: whether the operating system failed. A frequent cause of failure is the disabled synchronization function. In this case, simply tick and plug in the headphones again. It should be noted that the majority of modern technology has the maximum potential for connecting a headset: at least 4 contacts. However, there are models where the contacts are "rearranged" especially for the buyer to purchase accessories of a particular manufacturer.

REFERENCE. Wireless connection is in great demand. Its specificity is the ability to work two devices together, even at a great distance. Most often, the range of not more than 10 meters. Only rare models are able to keep a stable signal in the area of ​​coverage up to 1 kilometer.

A connection problem may arise if the smartphone is clogged with a RAM, or it is simply not enough to complete the transaction. In this case, it is recommended to reset the settings to the factory default settings. To do this, go to the settings, find the "Restore" item and put "reset all values ​​to the default settings." You should know that after such actions all data stored on the device will be deleted. Therefore, it is better to save photos and videos in advance in another place.

If you did not fix the problem on your own, you will most likely have to contact the service center. Usually they check the status of contacts. To do this, turn off the device, completely disassemble, remove the SIM card and flash drive, and then unscrew the bolts securing the case.

Why the phone does not see bluetooth headphones

Let us examine the main reasons why the phone does not find bluetooth headphones:

• Headset not included. In this case, you can try to make full contact several times. All devices have a special connection indicator button. In addition, a sound or light signal may be triggered. If the indicator does not light up, it means that some device is faulty.
• In the phone and headphones should be activated bluetooth. However, this factor is not the key, as many devices turn off it in automatic mode when idle.
• Devices are not synchronized or incompatible. Typically, for specific phones are prescribed suitable headset models. If there is no such information, then it is better to select an accessory in the communication salon by sampling. Among the reasons can be identified and the use of different versions of bluetooth. For example, a problem may arise if the headphones support Bluetooth of the fifth version, and the mobile phone is designed only for the third.
• Low battery. It is important that both devices are charged. Communication may be interrupted if the battery on one of the gadgets is discharged. Often, equipment that is on the counter for a long time, even when turned off, consumes energy. Therefore, the power supply should be checked.
• The headset was previously synchronized with another gadget. In this case, it detects the audio system, but does not connect to it. Such a malfunction often manifests itself when buying new products from hands.
• Hardware failure of the phone or headphone.

REFERENCE. One of the software problems is an outdated firmware version. The malfunction may occur regardless of the type of operating system (Android or IOS). It can be updated either personally or by contacting a repair shop.

How to connect a wireless headset

First of all, it is important to know how to properly connect a wireless headset to the phone. Simply switching bluetooth to synchronize with another device is not enough. This moment is the most common mistake of inexperienced users. When first connected, the audio device switches to automatic connection mode for 3 minutes. After connecting the headset, you need to activate it in the section available devices. To do this, go to the settings, select "Connections" and click "Bluetooth". The list of available gadgets periodically need to be updated, and in some cases, the device may request a pin code. This combination of numbers is easy to remember: 0000, 1111 or 1234. It is usually written in the documents for the headset.

If done correctly, contact with the device should be established. After the pairing procedure, both gadgets must remember each other and you will not have to repeat this sequence of actions anymore. If the pairing is not found in automatic mode, then you can use the manual search. Many headphones have a standby mode. Even in the paired state, when there is no sound transmission, they can turn off.

IMPORTANT. In many cases, a regular reboot helps. The power button is held for 10-15 seconds. If the headphones were turned off, the device should appear on the phone screen.

Programs for working with bluetooth headset

For owners of smartphones, special utilities have been developed that help to make key settings without even having special skills, which is very convenient for people of all ages and generations. There are programs that help in recognizing bluetooth devices. For example, the BTCall Demo 2.8.2 program is in great demand. Thanks to it, synchronization can be performed in automatic mode. The user can independently install this program. The main functions of this utility include the following:

• Activate and deactivate connections during incoming and outgoing calls.
• Select calls that will be forwarded to the headset.

Popular and program SmartKey, also has a wide range of features. Missed Call 0.8.9. simply indispensable to those who constantly lose connection bluetooth. She will notify you of the disconnection and unanswered calls.

We hope that this article will be useful and will help to solve the problem of connecting bluetooth headphones. Most of the reasons why a smartphone does not see the headset, due to the carelessness and haste of buyers. However, there are more serious damage that requires expensive repair or replacement of devices. The main thing - to correctly and in time to establish that led to the problem.