The chimney device in the bathhouse for a wood stove: how to calculate the chimney for the stove in the bathhouse

Of course, in every practical bath a chimney must be present, moreover, with the right equipment.

What should be the correct chimney in an iron stove for a bath

It is to the device of the metal furnace that are installed several supports to maintain. They must have special clearances.. This is necessary to expand the pipes, and it is better if they are from asbestos. Such products are the most reliable and fireproof, when compared with ordinary ones. But despite this, it is advisable not to expose them to direct fire. To do this, the installation is performed to the initial knee, and asbestos cement is attached next.

As for the chimney equipment, it is, first of all, protection against various weather conditions. The upper part needs a guarantee of safety from rainfall. It can also be a cone-shaped plug; moreover, it will provide a free exit for smoke. And to drain the condensate, another special plug is installed. In addition, it will be suitable for cleaning pipes.

Varieties of chimneys in a wood-burning stove for a bath

Basically, there are two types of construction. Let's analyze each in more detail:

Indigenous. Feature is a special structure. They are installed separately, but very close to the stove. They are connected by a special purpose pipe - it is he who branches the smoke into the main channel. During the construction of this type, it is possible to use several furnaces at once, respectively, if the pipes are at different heights and with different diameters.
Mounted. This model is more interesting: it is installed directly on the nozzle of the furnace. Therefore, the builders of the bath are in demand. The chimney is removed from the room through the roof.

In addition to the described separation, the device can be distinguished by the following criteria:

Outdoor. By the name it is clear that they have the main part located on the street. Themselves are fixed inside the house to the wall. In which case it will not be difficult to repair it.
Domestic. Provides more traction than other varieties due to its upright position. With its help, the room is perfectly heated.

How is the chimney in a wood-burning stove for a bath

Conventionally, the design can be distributed in 9 directions:

If you start from the bottom, then the oven itself is the first. Thanks to it, the water that is inside is heated.
Minerite panel - protects walls from combustible materials.
Convector. It removes heat from the chimney.
Shiber - regulates traction.
The adapter is starting. Provides a transition to sandwiches.
Ceiling passage unit.
Chimney sandwich. Prevents condensation and provides additional thermal protection.
Master Flash - Seals the passage through the roof.
Heading - considered the final element.

What should be the diameter of the chimney for a bath stove

Of course, the named parameter must be correctly defined. If it is larger, then the smoke that rises through it undergoes rapid cooling. And this contributes to the formation of condensate. Typically, this information is presented in the instructions for the device. However, it happens that it is not, and you have to think for yourself. The following aspects will help you with this. The indicator directly depends on both the power and the mass of the product.

If we adhere to standard proportions, then we obtain the following indicators:

With power up to 3.5 kW, diameter = 140 * 140 mm.
3, 5 - 5, 2 kW - 140 * 200 mm.
5, 2 - 7, 2 kW - 140 * 240 mm.

ATTENTION!
Values were indicated provided that the shape of the chimney is rectangular or square. And it is worth remembering that they are less effective, because they most often form turbulences. With round appliances, it should be borne in mind that it is unacceptable when it is smaller than the exit section with the furnace opening.

How to calculate the parameters and the device of the chimney for the stove in the bath

As for the size and height, the most important point is the degree of elevation of the room itself. When the pipe is figured over the ridge in half a meter, the distance will be up to one and a half meters from the ridge. If the product is located at a distance of about 1, 5 - 3 meters, then the pipe can be placed on one straight line or even higher. When the device exits through the ceiling, the unit must be erected more than one meter.

For self-assembly, it is desirable to take into account the material:

Brick chimney it is permissible to connect to any heating system, regardless of height. In addition, you can allow vertical deviation, the main thing is insignificant. So, if you need a simple product, then the option will suit you, besides it has a high resistance to stressful situations.
Metal. The withdrawal is carried out both through the roof and through the wall. If it is necessary to install without a foundation, it is better to choose the presented unit, since it has a low weight.

After careful selection of the chimney according to the described parameters, you can safely proceed to its construction or purchase.